Tips & tricks for carving your most lifelike St. Nick
By Dylan Goodson
Iam fascinated by the way the legend of Santa Claus has evolved, turning a third-century monk into a shopping-mall icon. After some research on carving a realistic Santa, I created this original interpretation of St. Nick based on the classic Coca-Cola-style Santa as he delivers gifts.
Materials & Tools
- Basswood, 4″ (10.2cm) thick: Santa,
5″ x 12″ (12.7cm x 30.5cm); base
5″ x 1 1/4″ (12.7cm x 3.2cm)
- Basswood, 2″ (5.1cm) square: arm and
bag add-on, 4″ (10.2cm) long
- Wood glue
- Wood screws, #8: 2 each,
1 3/4″ (4.4cm) long
- Paints, such as Liquitex: ivory black,
burnt umber, deep violet, vermilion,
sap green, titanium white, ultramarine
blue, cadmium yellow; such
The 20th anniversary issue of the world’s best how-to magazine for woodcarvers is packed with carving patterns, how-to tips, and step-by-step projects for all skill levels. We offer plenty of carving ideas for Christmas gifts and decorations, plus many great projects unrelated to Christmas that will make terrific gifts.
- Carving knife (hook knife)
- Skew chisel: 5/16″ (8mm)
- Left and right spoon-bent skew
chisels: 1/16″ (2mm) (optional)
- #3 gouge: 3/4″ (19mm)
- #5 gouges: 1/8″ (3mm),
5/16″ (8mm), 9/16″ (14mm)
- #7 gouge: 5/32″ (4mm)
- #9 gouge: 1/2″ (13mm)
- #11 gouges (veiners): 1/8″ (3mm),
- V-tools, 60°: 1/16″ (2mm), 12mm
- Drill with screwdriver bit
The author used these products for the project. Substitute your choice of brands, tools, and materials as desired.
I am fascinated by the way the legend of Santa Claus has evolved, turning a third-century monk into a shopping-mall icon.
~ Dylan Goodson
Making a Happy Mustache
While many people give Santa an upturned mustache to make him look happy, I prefer to give him a down-turned mustache. When you smile, the corners of your mouth lift up and stretch out. This straightens and tightens the upper lip, which straightens the upper edge of the mustache where it grows out of the upper lip. Once the mustache reaches the area between the corner of the mouth and the smile line, it should turn down. If it turns down before it reaches the corners of the mouth, it will make for a sad or mad look.
Carving a Realistic Santa Book Titles
Giving a hand carved Christmas ornament or gift is as much fun as it is to make one. Includes projects for caricature ornaments, whittled pencils, a folk art tree topper whittled pencils, and more
Woodcarving Illustrated Books presents its latest how-to guide for carving the jolly man in red and his crew of friends – elves, gnomes, reindeer and much more! With more than 20 delightful patterns from accomplished carver Ross Oar, you’ll craft the adventurous Luge-Riding and Sky-Diving Santa’s, a Cowboy Santa, the classic Sledding Santa, European-inspired Olde World Santa and more.
Add Realism to Santa’s Bag
To add interest to Santa’s bag, carve wrinkles and folds into the bag that give the impression that the boxes and toys are pressing against the inside of the bag as if they are about to burst out. To figure out how to carve these wrinkles, fill a bag with boxes and toys and have someone photograph you posing with it.
Carving Fur Trim
Choose a type of fur trim for the clothing (rabbit fur, wool, etc.). I use a rotary tool with a small, inverted, cone-shaped ceramic bit to carve short fur texture, such as rabbit fur. For sheep’s wool, I use a small veiner. For fine fur textures, use a wood burner.
Painting White Areas
For white fur, leave the trim natural wood and dry-brush white on the high points. To paint a pure white beard, brush yellow into the deep areas and then dry-brush white across the beard. I chose to shadow some areas with gray to add interest. If you shadow the entire beard with gray, then it’ll be a salt-and-pepper beard rather than white.
Developing the Design
Ihave two methods for designing new carvings. For my Sea Captain (Summer 2017, Issue 79), I needed to work out the pose, clothing, and details, so I sculpted a clay model. But for this Santa, I took a shortcut. I didn’t have the time to invest in a clay model, and I am familiar enough with Santa’s clothing that I didn’t need to work out the specifics of the design before carving it.
Instead, I used the Pose Tool 3D app (made by Alienthink.com) on my smartphone to create a pattern for my Santa. The app is meant to help you draw human figures with correct anatomy from different angles in complex poses. I posed the 3-D figure in the app; took screenshots of the front, back, and sides; transferred those images to my computer; and printed them. Then, I simply drew the clothing on top of the pictures of the figure. With my front- and side-view patterns created, I transferred the outline of the patterns to the wood and cut it out with the band saw. It’s a quick and easy process that works well when I don’t need the more detailed clay model.
Other Santa Carving & Holiday Titles
Learn to carve 15 festive Santa’s from around the world with this step-by-step guide. Great for beginners, this book begins with an overview of carving tools, materials, safety, transferring patterns, and basic cuts. Then, you’ll follow the author as she guides you through 3 projects featuring step-by-step carving and painting instructions. Patterns and photographs for 12 additional projects are included for free-standing and shelf-sitting Santas.
Get Exclusive Email Offers And Receive 15% OFF On Your First Book Order!
About the Author
Born and raised in Alabama, Dylan Goodson is a recent transplant to Michigan’s Upper Peninsula, where he lives with his woodcarving wife, Barb. When not snowed in, he travels the country teaching carving seminars and participating in carving shows and competitions. His website is www.oldoakenterprises.com.